Using a male 1/4″ to 1/4″ cable plug one end out of the left channel into a free 1/4″ input of the soundboard. On the back of the Alesis IO2 are two 1/4″ main outputs. Once you have the 1/4″ cable plugged out of the Aux/Effects send bus into the Alesis IO2 line input you can now proceed to set up the return feed. If you are using a single mic you can also use the mic input of the Alesis IO2. This step will allow all of the mics that are plugged into the soundboard to be broadcast through the Skype call. For most soundboards, this is a 1/4″ output. Most quality mixing boards have these outputs. Related: See Our Article on How to Setup an External Microphone on a Computer Patching The Interface Into a Soundboard Setting Up the Send Feedįirst, you want to use an Aux send or Effect send feed to the line input of the Alesis device. The Alesis IO2 is available from these retailers. USB bus-powered – no external power supply needed.Inputs for microphones, line-level sources, and instruments including guitars. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |